Is your internet is not working as expected? Is the web address routerlogin.net taking ages to load? If so, then you need to power cycle Netgear R7000 router. Power cycling your Netgear R7000 router gives it time to cool down and rest for a short while. But, 4 out of 5 Netgear router users accidentally reset their Netgear router instead of power cycling and wipe out all the settings made by them.
Need not to worry! We’ve got you covered! This write-up will walk you through the process of how to power cycle Netgear R7000 router. Let’s dig a little deeper, shall we?
When to Power Cycle Netgear R7000 Router?
Power cycling is the easiest way to fix common or major issues with your Netgear R7000 router. Not only this but also the power cycling process fixes issues with the network hardware as well. Whether your PC, laptop or smartphone loses the internet connection or the latest firmware version are taking forever to download, just restart or power cycle your Netgear R7000 router.
Bear in mind that your Netgear R7000 router should be restarted or rebooted in correct order. Else, you may face plethora of issues with your Netgear router and can lose internet connection as well.
Power cycling your Netgear R7000 router helps you fix a couple of below-mentioned issues:
- Unable to complete Netgear R7000 setup
- Unable to access routerlogin.net setup page
- No power or internet LED on Netgear R7000 router
- WiFi connected but no internet
- Facing issues while connecting your WiFi-enabled devices to your router’s WiFi
Let’s take the plunge to power cycle Netgear R7000 router.
Power Cycle Netgear R7000 Router
Follow the steps given-below in exact order to power cycle Netgear R7000 router:
Step 1: First things first, unplug your Netgear R7000 router from its respective power socket.
Step 2: Disconnect all the devices that are connected to your Netgear R7000 router.
Step 3: Wait for at least 10 minutes.
Step 4: Turn on your Netgear R7000 router and wait for the power LED on it becomes green.
Step 5: Connect your Netgear R7000 router to your modem using an Ethernet cable or in a wireless manner.
Step 6: Thereafter, connect your WiFi-enabled devices to your router’s WiFi and access the Netgear R7000 setup page using 192.168.1.1 IP or routerlogin.net web address.
That’s it! In this way, you can power cycle Netgear R7000 router in minutes. But, power cycling is the last resort. To fix major or minor issues with your Netgear R7000 router, you must keep the following points into consideration.
- Place your Netgear R7000 router and your modem in close proximity with each other. If possible, place them in the same room.
- Do not place your Netgear R7000 router in a congested place.
- Also, avoid placing your Netgear R7000 router near to walls, windows, inside a cabinet or under a table.
- Complete the Netgear R7000 setup process properly.
- Change the default Netgear router login details, SSID, and wireless channels.
- Apply the power cycling process frequently, not only when you face issues with it.
- The center location in your home would be the best place for your Netgear R7000 router.
- While connecting your WiFi-enabled devices to your router’s WiFi, if you face connectivity issue, then ensure that your R7000’s SSID isn’t hidden.
- Use 192.168.1.1 IP or routerlogin.net web address to change the wireless security settings on your Netgear R7000 device. Do not enter them in the browser’s search bar field. The web or the IP address should only be entered in the web browser’s address bar.
- On the off chance if you have any doubts or queries for your Netgear R7000 router, feel free to ask our technical experts anytime.