Is the WiFi of your Netgear Orbi device unstable? Is your Orbi not standing to its true potential? If the answer to both these questions is yes, know that we’ve got you covered. In this article, we’ve mentioned some of the topmost troubleshooting tips that’ll help you fix the issue at hand. Thus, without wasting any more time, let’s get started.
Note: While troubleshooting the issue, if you fail to understand anything, don’t hesitate to reach out to our highly experienced technical experts.
Troubleshooting: Netgear Orbi WiFi Unstable Issue
Get Rid of Unwanted Interference
One of the topmost reasons why the network of your Netgear Orbi is unstable is because it’s getting interrupted. To fix this issue, it is recommended that you place your WiFi device away from transmitting appliances. Some examples of such appliances are cordless phones, washing machines, baby monitors, Bluetooth speakers, treadmills, microwave ovens, and televisions.
Reflexive surfaces like mirrors and fish tanks can also cause interference in the signals of your device. So, maintain a safe distance from such surfaces too.
Perform Netgear Firmware Update
An outdated or corrupted firmware is another issue why your Orbi WiFi network is unstable. Therefore, updating your firmware can fix this issue. Also, if your Orbi device has some other flaws, performing Orbi firmware update will resolve them too.
Mentioned below are the step-by-step guidelines to update the firmware of your Orbi device:
- Power on your Orbi router.
- Connect the router to the modem using a cable.
- Open a random web browser on your laptop.
- Whatever web browser you use, ensure that it is updated.
- Perform orbilogin and navigate to the Settings option.
- Now follow the on-screen instructions and update the firmware of your device.
Updating the firmware of your Netgear Orbi will hopefully resolve the issue. On the off chance, if it doesn’t, then you need to scroll down, and follow the next troubleshooting step.
Relocate Your Orbi Device
The WiFi of your Orbi might also be unstable because of the wrong placement of the device. Thus, place your Netgear Orbi device in a clean, cool, and well-ventilated area. Position your WiFi device in the center-most location of your house. Additionally, DO NOT place your Orbi in a dead zone. Doing so will make the WiFi network even more unstable.
Perform Factory Default Reset
Relocating the device and updating its firmware didn’t resolve the issue for you? Well, in that case, restoring your Orbi to its factory default settings might be your last resort.
Note: Once you are done resetting your device, don’t forget to perform Netgear Orbi setup. In case you need any help installing your Orbi device, feel free to contact our technical experts.
Here’s how to restore your Orbi to its factory default mode:
- Grab a cable and connect your device to the power adapter.
- Plug the power adapter into the wall socket and power on your device.
- Once the LED light turns green, look for the Reset button.
- As soon as you locate the Reset button, press it.
- It is recommended that you a sharp object (oil pin, paper clip, toothpick, etc) to press the Reset button on your Netgear Orbi device.
- Now, wait for a couple of seconds.
After some time, your Netgear Orbi device will get restored to its factory default settings.
Is Your Orbi WiFi Still Unstable? Contact Our Experts Now!
After following the troubleshooting tips mentionned above, if your Netgear Orbi device still is hampering your internet experience, then get in touch with our technical experts right away. They’ll provide you with the guidelines to fix the issue at hand.